Roofing in Arlington, Texas
Compare roofers in Arlington and get up to three free quotes, with no obligation.
What it costs here: a typical asphalt shingle roof replacement in Arlington costs $6,715 – $20,144 in 2026, with most homeowners paying around $11,880. Repairs run $155 – $3,616.
- ✅ 100% free, no obligation
- 📋 Up to 3 local quotes
- ⏱ Response within 48h
Free estimate · No obligation
Get your roofing project in Arlington priced over the phone
No form to fill in. Describe the job on the phone, ask what it should cost where you live, and get a quote.
☎ (252) 582-9330- Free for you — the contractor pays for the call
- No form, no email address, no follow-up spam
- Ask about your own roof, not an average
Connects you to an independent partner contractor. We are paid for calls. Calls may be recorded.
How it works
Call the number
One call — no form to fill in and no email address to give.
Describe the job
Tell them what you need done in Arlington and roughly when.
Get your price
You speak with a contractor covering your area and get a figure for your own project.
Decide freely
No obligation. The call is free for you — the contractor pays for it.
Arlington roofing prices in 2026 are driven by three local realities: a tight labor market for qualified roofers, an older suburban housing stock with prevalent steep-slope asphalt roofs and moderate numbers of low-slope commercial roofs, and frequent hail/wind exposure that raises material and labor costs. Skilled crews command premium hourly rates; roofers in Arlington are often booked weeks out during spring and fall storm seasons.
Those factors push typical full asphalt replacements toward the high end of national ranges. Using the local cost index (1.03), expect projects to run slightly above the U.S. average: full asphalt replacement commonly falls within the $6,714–$20,144 anchor, with a typical Arlington job near the midpoint at about $11,879 adjusted upward by regional demand and storm-season surcharges.
Roof replacement cost in Arlington: low, typical, high
| Low | Typical | High | |
|---|---|---|---|
| Total project | $6,715 | $11,880 | $20,144 |
| — Labor (≈60%) | $4,029 | $7,128 | $12,086 |
| — Materials (≈40%) | $2,686 | $4,752 | $8,057 |
Figures assume an average single-family home (~1,700 sq ft of roof surface), one existing layer torn off, and standard accessories. Steep, cut-up or hard-to-access roofs land above these ranges.
Cost by material in Arlington
| Material | Installed total (typical roof) | Lifespan |
|---|---|---|
| 3-Tab Asphalt Shingles | $7,902 – $14,049 | 15–20 yrs |
| Architectural Shingles | $9,659 – $16,683 | 20–28 yrs |
| Corrugated Metal | $12,293 – $19,317 | 30–45 yrs |
| Standing Seam Metal | $17,561 – $28,098 | 40–70 yrs |
| Cedar Shake | $17,561 – $26,342 | 30–40 yrs |
| Clay / Concrete Tile | $21,073 – $43,903 | 50–100 yrs |
Cost by home size
| Home footprint | Approx. roof area | Architectural shingles, installed |
|---|---|---|
| Small home (~1,200 sq ft) | ~1,400 sq ft | $8,045 – $13,896 |
| Average home (~1,700 sq ft) | ~2,000 sq ft | $11,397 – $19,686 |
| Large home (~2,400 sq ft) | ~2,850 sq ft | $16,090 – $27,792 |
Why Arlington prices run above the national average
Arlington carries a local cost index of about 1.03 — roofing labor, permits and equipment here price roughly 3% above the US average, driven mostly by labor rates. Texas roofing prices vary widely by metro, and hail plus hurricane exposure means insurance rules heavily shape material choices.
Storm seasons matter too: after a major hail or wind event, contractor backlogs in Texas can push quotes 10–20% higher for months. If your roof can wait, off-season bids (late fall to early spring) tend to come in lower.
Roofing in Arlington: materials, weather and permits
Roof materials that make sense in Arlington
Asphalt fiberglass composition shingles dominate single-family homes because they balance upfront cost, availability, and insurance acceptance after hail events. Architectural (laminate) shingles with enhanced granules are common for better hail resistance and a longer warranty. Metal roofing is growing — standing seam and metal panels resist wind and hail better, last longer, and can lower long-term maintenance, but have higher initial cost and require experienced installers. Tile and slate are less common due to weight and higher installation complexity on Arlington’s typical wood-framed roofs.
Weather and insurance angle
Arlington sits in North Texas’ hail corridor and sees occasional high-wind storms from nearby frontal systems. Insurance policies here often include separate wind/hail deductibles or percentage deductibles tied to the home’s insured value. After a storm, insurers scrutinize documentation: dated photos, contractor estimates, and a roof certification help. Because insurers influence material approvals, homeowners frequently pick impact-rated shingles or metal options to meet claim guidelines and reduce future premium increases.
Permits, HOA and code notes (Texas context)
Permits are typically required for full roof replacements in Tarrant County/City of Arlington; simple repairs may not, but verify with building inspections. Arlington enforces the International Residential Code adaptations and local wind-load requirements — installers must follow nailing patterns, underlayment, and flashing standards. HOAs commonly require architectural review or color approval and may have specific material restrictions. Always confirm permit, inspection, and HOA conditions before signing a contract.
How to hire a roofer in Arlington (and what to avoid)
- Get 3 written bids. Line-item quotes make comparison honest — tear-off, underlayment, flashing, disposal, permit.
- Verify license & insurance. Ask for the Texas contractor registration/license number and a current certificate of insurance — then check them with the issuing authority.
- Check the paper trail. Manufacturer certifications (GAF, Owens Corning, CertainTeed) and a local physical address beat a magnetic truck sign.
- Never pay in full upfront. A deposit of 10–30% is normal; final payment on completed, inspected work.
- Get the warranty in writing. Separate manufacturer (materials) and workmanship coverage — and who honors it if the company changes hands.
🚩 Red flags — especially after Texas storms
- Door-to-door "storm chasers" who found damage you can't see, want to file your insurance claim for you, or offer to "cover your deductible" (illegal in many states).
- Out-of-state plates, no local references, pressure to sign today.
- Quotes far below every other bid — the gap usually reappears as change orders or shortcuts.
Roofing repair costs in Arlington
Not every problem needs a new roof. Typical repair pricing in Arlington:
- Minor repairs (a few shingles, pipe boot): $155 – $465
- Leak diagnosis and repair: $517 – $1,550
- Chimney Flashing Repair Cost: $207 – $1,859
- Roof Inspection Cost: $124 – $620
Rule of thumb: when repairs approach 25–30% of replacement cost on aging equipment, replacement is usually the better long-term spend. See the full repair cost guide.
How we calculate Arlington costs
We start from documented national baselines, size the job to a typical home for this metro, then apply Arlington's local cost index (≈1.03). Full details on our methodology page. These are planning ranges, not quotes — a real bid for your specific roof beats any model. Want that real number? Get free local quotes.
Frequently asked questions
When is the best season to replace a roof in Arlington?
Late spring and early fall are best: weather is drier and crews are less backlogged than during peak storm seasons. Scheduling outside major hail/wind windows reduces emergency surcharge risk and accelerates permit timelines. Expect longer lead times if you wait until after a big regional storm.
Is roofing more expensive in Arlington than the US average and why?
Yes, slightly. The local cost index of 1.03 reflects higher labor demand, frequent storm-related work, and insurance-driven material choices. Use the provided anchors: full asphalt replacement ranges $6,714–$20,144 with a typical $11,879; Arlington projects commonly trend above the national midpoint.
How do insurance claims work after a Texas hail or wind storm?
Document damage immediately with photos, get a contractor estimate, and file a claim quickly. Insurers often send an adjuster and may specify approved materials. Keep repair receipts and contractor warranties — separate wind/hail deductibles or percentage deductibles can apply, so verify your policy before committing to work.
How many contractor quotes should I get in Arlington?
Get at least three written estimates from licensed, insured roofers who inspect the roof in person. Compare scope, materials, fastening patterns, permit handling, warranty terms, and cleanup. In storm-affected markets, validate contractors aren’t storm-chasing without local references.
When is repair preferable to full replacement here?
Repair is reasonable for isolated issues—localized leaks, flashing failures, or limited shingle loss—when the roof has substantial remaining life. If damage is widespread, underlayment compromised, or the roof is near typical asphalt life expectancy (15–25 years depending on product), full replacement is more cost-effective and often required by insurers.
How Arlington compares to nearby metros
| Metro | Typical replacement | vs Arlington |
|---|---|---|
| El Paso, TX | $9,775 | -18% |
| Lubbock, TX | $9,890 | -17% |
| Amarillo, TX | $9,890 | -17% |
| Corpus Christi, TX | $10,350 | -13% |
Ready for a real number for your Arlington roof?
One call and a contractor covering Arlington prices your own project — no form, no email, no obligation.
☎ (252) 582-9330